Our latest development allowed us to extend our product range once again. This new platform lifts for the private sector combines the characteristicts that are already well-known from our service and goods lifts range:

The modular system of our service lifts including the auxiliary structure allows a flexible adjustement to existing site conditions and it reduces the installation time to a minimum. We combine stylish design with highest quality and reliability as you can expect from a German-engineerd and manufactured lift.

The innovative belt drive allows us to reduce the headroom and pit depth to mimimum dimensions and ensures a silent and smooth running.

The IDEALLIFT is test-type certified and constructed based on the current machinery directive 2006/42/EC together with the harmonized standard EN 81-41. Please find below some information about our IDEALLIFT:

• Capacity 250 - 385 kg
• Car width 650 - 1100 mm
• Car depth 1050 - 1400 mm
• Car height2000 mm
• Travel up to 12 m
• Single hinged landing doors
• Motor position at the top
• Nominal speed 0,15  m/s
• Pit depth min. 100mm
• Headroom min.  2500 mm

Basic features:

• Car with Zintec steel for individual colour design by the customer. Car floor prepared for flooring by the customer (thickness max. 5mm)
• Landing doors with Zintec steel and large glazed vision panel “Panorama“
• Continuous load guards between landing doors
• Galvanized structure for the installation in a supporting shaft. Quick and easy installation with pre-assembled components
• VVVF controlled traction drive unit  with t belts as suspension
• PLC control unit, completely pre-wired, low voltage engineering
• Single phase mains supply 1x230V/N/PE/50-60Hz
• Car operating station with constant pressure buttons
• Landing operating station, with automatic call-control
• LED car lighting with emergency lighting
• LED shaft lighting
• Car entrance protection: light curtain
• Preparation for autodialler by the customer
• Overload device

Optionally:

• Self-supporting Zintec steel structure
• Structure prepared for glass panels by the customer
• Zintec surfaces powder coated in standard RAL colour
• Landing doors fire-rated acc. EN 81-58: E120, EW60, EI90 or DIN 18090
• Hold-open device for landing door including door release/close button inside the car
• Automatic shaft doors with door drive unit
• Different materials and designs acc. to customer‘s requirements
• Water/dust ingress protection (IP)
• Other tailor made solutions on request