Lifting table - Capacity from 500 to 2000 daN
Model:
SL2
Brand:
ATLAS LIFT
Country of Origin:
France
Product Approvals:
EN 1570
Sample Available: No
For product pricing, customization or other inquiries:
View Contact Details
CEFAM S.A. Fabrications ATLAS
-
France
- Manufacturer
- Founded: 1968
-
Website:
www.cefam-atlas.com -
Location:
Parc Atlantique de l'Ormeau de Pied, 7, Rue des Signaux
Saintes
Cedex
The lifting table type SL2 is designed to fit various applications.
- Capacity from 500 to 2000 daN,
- Vertical lifting up to 2500 mm,
- Large choice of dimensions easily modifiable,
- Various specific equipments.
DESIGN
Designed for uniformly distributed loads on the whole surface of the platform.
• Folded plain steel sheet, thickness : 6 mm.
• Articulations, bearings and rollers equipped with lubricated rings, without maintenance, forecasted for maximum 15 cycles per hour, 8 hours a day, 5 days a week.
• Hydroelectric power unit placed within the base frame with an IP54 motor.
• Electrical chest placed outside, feeding voltage 3 phase 230/400 volts 50 Hz connected to the lifting table with 3 metres cable.
THE LIFTING TABLE SERIAL SL2 INCLUDES :
- A circuit-breaker with a padlocked remote control.
- A motor switch.
- Protection fuses.
- A transformer for the 24 V voltage.
- “Up - Down” and “Emergency stop” push button controls are linked to the electric control chest with a 3 meters cable.
- Connecting cables type FR-N05-VV5F for control chest / lifting table / button box.
- Colour : BLUE RAL 5014.
MAXIMUM SECURITY
through design and standard equipments.
• Double hydraulic security by incorporated valve in each cylinder and electrical non-return valve placed at the cylinders bottom. This security maintains and locks up the platform in case of electrical supply failure or hose breaking.
• Pressure limit valve set in factory to prohibit the lifting of a load heavier than the nominal capacity of the lifting table.
• Electrical end of stroke switch on high position, it ensures the automatic stop once the lifting platform reaches its maximum stroke.
• Safety frame underneath the platform perimeter stopping the lowering motion in cases of obstacles.
• “Up - Down” and “Emergency stop” push button controls 24 V. Important : the emergency stop cuts the power supply circuit.
• Safety legs necessary for the mechanical chocking of the table for maintenance. These legs are designed to carry the nominal load.
• Control tests on each lifting table before dispatch.
RESPECT OF THE REGULATION
Design and manufacture of these standard lifting tables comply with the French regulation issued from the European Machines Directive n° 98/37 and norm EN 1570.
All our models are delivered with the EC conformity marking.
OPTIONS OR SPECIFIC EQUIPMENTS
• Up and Down controls by pedal.
• Side protections with reinforced skirt or bellow.
• Manual turntable.
• Safety handrails.
• Roller conveyors.
• Articulations for non-stop working.
• Special models on request.
